LJ320U27 Sharp
display. We have repaired and supplied many
LJ320U27 display for industry. If you have a
LJ320U27 that is faulty we suggest you use
it for an exchange. Availability on the
LJ320U27- hard to find.
LJ512U21 Sharp
display. We have repaired and supplied
refurbished LJ512U21 for industry. If you
have a LJ512U21 that is faulty we suggest
you use it for an exchange with Capetronics.
Availability on the Sharp LJ512U21 - hard to
find.
This LJ512U25 was used in many different applications and
machines. We have repaired and refurbished
many LJ512U25 Sharp displays over the years.
If you have damaged units, we suggest you
save them. Availability on the LJ512U25 -
Hard to find.
The Sharp LJ512U27 have moved through our doors just
as much as the Sharp LJ512U25. If the glass
part of the display is in tacked then we are
100% able to repair this Sharp LJ512U27.
Availability on the LJ512U27 - hard to find.
The Sharp LJ512U32 is a display that was also used in
many different machines and we have repaired
many of these LJ512U32. Availability on the
LJ512U32 - Hard to find. If you do
find some displays make sure you ask the
company you are purchasing from if they have
completely refurbished and checked the
display for burn-in and possible electrode
damage. Also make sure there is a
warranty on your purchase.
This is a very
popular display and is still used in many
different pieces of equipment. The LJ640U27 has been repaired and retrofitted at
Capetronics Inc on many occasions. You can
still find some used ones around. Not many
LJ640U27's out there. If you do find some LJ640U27 displays make sure you ask the
company you are purchasing from if they have
completely refurbished and checked the
display for burn-in and possible electrode
damage. Also make sure there is a
warranty on your purchase.
The LJ640U31 is a display that uses 5 VDC and 24 VDC as
supply voltage. These LJ640U31 displays are really robust but because of
their age we have seen many with moderate to
extreme burn-in images where the ZnS:Mn thin
film has been damaged.
In our
experience this is the most repaired display
to come through our lab. The LJ640U32 is a
640 line by 400 line resolution. The
availability on these LJ640U32 displays is
"hard to find" especially in good working
condition. We are extremely competent when
it comes to the Sharp LJ640U32 displays. We
used special test equipment and X-rays to
repair and test these displays. Capetronics
does have a brand new factory warranty
replacement display for the LJ640U34 that is
also EL technology. Part number C640U32
Still an
obsolete LJ640U34 display but a newer EL
display made by Sharp. Sharp EL displays
were the first commercial EL displays to
come onto the market back in 1983. We have
repaired many LJ640U34 displays and welcome
any that you might have that need repair. If
you do find USED LJ640U34 displays make sure
that the seller has refurbished them
completely and have tested the LJ640U34 for
burn-in. There is nothing like having
Chinese writing as a burn-in image and we
have received many of those. Capetronics
does have a brand new factory warranty
replacement display for the LJ640U34 that is
also EL technology. Part number C640U34.
This LJ640U35 display is a display that has been
used in quite a few medical products back in
its day. Also a very robust display and if
the display controller has a screen saver
function this LJ640U35 should still be in
operation in most cases. Of course there are
heat and time sensitive components that
should be replaced. Availability on the
LJ640U35 is of course "hard to find"
We have
repaired and refurbished many LJ64ZU49, LJ64ZU5 and LJ64ZU52 displays over the
years. These displays are more complex than
the LJ640U32, LJ640U34, LJ640U35 and
LJ640U27 displays. These displays have
something called gray scale option. The
availability on these obsolete displays is
slim pickings. Capetronics is working on a
NEW EL option and that should be out soon.
Hitachi SeikiLJ640U34 EL screen rebuild refurbish. New-
Conversion Possible.
Hitachi SeikiLJ64ZU50 El screen rebuild refurbish and
test all 16 grayscales.
Hitachi Seiki
LJ64ZU51 EL screen rebuild refurbish and
test all 16 grayscales.
Stoll
Knitting Machine CMS422 display
problems? Contact Capetronics for a
retro fit display. C640U32
Cincinnati
Milacron CAMAC VEL controller unit. We
repair or retro fit this controllers
display. EL8358MS Conversion Possible.
Van Dorn Siemens
Pathfinder Controller - We repair this controllers
display only.
Numac Controller displays repaired and tested.
Datascope
Passport EL display repair Planar
EL640.200 U series. Missing lines or
Dead. Can't repair burn-in.
Allen
Bradley Panel View with EL Displays
Amber Screens. EL640.480-AM1
Barber
Coleman MACO Controller Display repair.
Barber Coleman controller is used on
many machine and we repair the
screen/display. Promax DIMA, TMC
Injection Molding Machine.
We would like to thank the very helpful technicians at Capetronics for the repair of one Planar EL8358MS display and the conversion of the other. Our entire semiconductor facility depended on two machines to operate and both were down. Thank You - J.R USA
Even though we are thousands of miles away from where Capetronics performs their magic, the service was speedy and the display worked great. - Australia Knitting
We purchased screens from Capetronics and we are very happy with their service. Even though the screens are not new, they look new and we have never had a problem - Germany AG
Thank You for your on going service. The OEM wanted $12 000.00 to retro fit our controller because the screen went bad and the technicians at Capetronics got us up and running within 24 hours. - USA Plastics
A job well done! 24 Hour turn around is hard to find these days - USA Semiconductors Manufacture
Engel Display - EC88
The
Capetronics Retrofit is here. Part # LJ640U32R.
Lower profile, draws less current than the
original, add more years to your Engel injection
molding machine, added heat vents and much more
robust than your original display.
1 Year
Warranty. That is 275 more days than Engel is
willing to give you.
Fill out this request form.
Sharp EL, Finlux and Planar displays
repairs, which we are very successful at repairing and our success rate has increased.
The only time we cannot repair a screen is when it has
a cracked glass substrate and if the ZnS:Mn layer is damaged
on the glass substrate. On older displays we may not
be able to find the obsolete controller IC if it
happens to be damaged. We repair and test Sharp LJ640U31 Sharp LJ640U32 Sharp LJ640U34 Sharp LJ640U35 from all over the world from countries like Germany, South Africa, South America, Israel, Australia and the U.K.
to name just a few. Now the Sharp EL display unit consists of a thin film EL panel, high voltage MOS IC's for panel driving and a display controller circuit and the DC to DC converter.
Just in case you are new to
Capetronics Inc we have to let you know that we
repair all EL displays in all types of machines in
the Aerospace, Nuclear, Medical and Manufacturing
industries.
Controllers like the the Van Dorn
Pathfinder has a Amber Yellow display that we
replace. Cincinnati Milacron CAMAC VEL machine
console uses a Planar EL8358MS 640X200 line CGA type
display. Because these displays are so old we tend
to retro fit them with a newer display. Much cheaper
than spending $12000 for a new unit.
We take good care of your screen
and we dont just repair them we make sure that they
pass a number of tests before we ship them out.
Nissei
injection Molding Machine display repair
DONE HERE! Nissei Plastic Injection
Molding Machine displays are expensive
to replace. Get it repaired at
Capetronics.
Battenfeld
Injection Molding Machine Display repair
or Sharp replacement. Battenfeld 44 ton
Unilog controller uses a display that
Capetronics can repair or retro fit.
Cincinnati
Milacron CAMAC VEL and CAMAC XTL controller unit. We
repair or retro fit this controllers
display. EL8358MS with a EL640.400 C3.
This is quiet involved so allow for
reasonable lead time. Emergency services
available.
Datascope
Passport EL display repair. Missing
lines or Dead. Can't repair burn-in.
On the
Datascope Passport EL D we repair the
Main Board 0670-00-0688 C because it
causes screen damage too. Sometimes the
screen damages the controller.
Siemens So
ISDN Analyzer K1403 7KK1403-0BC11-2A (we
repair the EL display)
TEAC RD-
180T- We repair the display on this too.
Allen
Bradley Panel View with EL Displays
Amber Screens.
Barber
Coleman MACO Controller Display repair.
Barber Coleman controller is used on
many machine and we repair the
screen/display. Promax DIMA, TMC
Injection Molding Machine.
Contact Capetronics for more information on the
LJ640U27 LJ640U31 LJ640U32 LJ640U34 or the LJ640U35 and the LJ089MB2S01 EL Displays. We also have Planar EL Displays (EL640.200-U5 Assy.) Keep in mind that these obsolete EL Displays can be repaired by Capetronics too. The Sharp LJ640U32, Sharp LJ640U31, Sharp LJ640U35 and the Sharp LJ640U34 EL Displays can also be bench tested and burned in before we send them out into the field again. We also perform a voltage calibration on these screens. Please contact us for more information regarding your Sharp
LJ64ZU49 LJ64ZU51 LJ64ZU52 LJ640U25 LJ640U27 LJ640U31 LJ640U32 LJ640U34 and LJ640U35 series EL display.
Sharp LJ640U31 (below)
If you work in a knitting mill or hosiery factory you probably have the following machine: 6CUS which is built by Sangiacomo in Italy. The controller or control unit is called WEL-650, WEL650, WEL 650 which is manufactured by a Japanese company called WAC Data Services for a range of knitting machines called 6CUS or 6cus. Well these controllers use the Sharp LJ640U31. We repair these LJ640U31 displays for a fraction of the cost of a replacement so contact the Service Department
for pricing and shipping arrangements.
_Lj640U34.jpg)
2007-09-13_09-42-06.jpg)
