Service Form

Sales Form

RMA Form

CAMAC XTL and CAMAC VEL: Capetronics Inc's NEW high contrast EL display Conversion.

The Camac VEL and the Camac XTL operator interfaces are OP's that we have mastered over the years. These older El8358MS displays that are used in these controllers are not easy to repair and even though they look simple the problems are complex.  CINCINNATI, MILACRON, CAMAC XTL and CAMAC VEL.

Below is a picture of the older EL8358MS display and this is an EL display that is over a decade old and is still going strong in most controllers. Of course having worked in the manufacturing environment I know that if a display lost 640 pixels the operations manager along with the maintenance manager would not spend thousands of dollars to upgrade. The attitude is that you can still "see" most of the graphics so leave it. We know this because we get plenty of displays in that have upwards of thousands of missing pixels and only when the overload has cause absolute failure does someone start looking for a company to perform or repair or find some place that will sell a used EL8358MS. Just so you know I have mentioned the age of this display and putting another EL8358MS back in does not make too much sense. Capetronics Inc will replace the old EL8358MS and put in a brand new factory warranty display with conversion electronics and CNC bezel. You need to ship your controller to Capetronics Inc.

A brand new HIGH CONTRAST EL display, new conversion electronics with safe guards and a robust CNC bezel. We did not spare any expense or cut any corners. If you want it done right then have Capetronics do it. This is a factory install and your controller needs to be shipped to Capetronics for retro fit display.  

We will need you complete controller to be sent to us. This is a 24 to 48 hour turn around job. Fill out a RMA form. We will give you an estimate and an RMA number.  CINCINNATI, MILACRON, CAMAC XTL and CAMAC VEL.

Service Form  Sales Form  RMA Form

 Copyright © 2001-2010 Capetronics Inc